In a modern work environment, proper ESD grounding is crucial to assure product high quality and reliability. When the control environment is very sensitive, then a loose or open grounding wire may cause serious damages to the sensitive parts in the product.
WY-300-M is low-price high-function dual workstation ESD monitor. It is able to monitor 2 independent wrist-straps and 2 ESD table mats. The real-time status is displayed at the 3-color LED on the front panel.
Using the built-in special circuit in each WY-300-M, multiple WY-300-M units can be interconnected into a network. A central management program on PC will communicate to the WY-300-M network through a router to collect overall monitor status (FASS/FAIL) and log the data into a database.
Key Features:
○ Built-in networking circuit
○ Continuously monitor 2 independent wrist-straps and 2 ESD table mats
○ Alarm limit for Mat: 1000MΩ
○ Each alarm item can be Enabled or Disabled
○ Built-in external interface to siren
○ Standby indicator: when power is on without wrist-strap plugged in
○ Typical capacitor tests: pass 150pF, fail 50pF
Software Support:
○ By WY-300-SEE, each alarm item is settable
○ By GZ-1800-H network router, a monitors network is easily setup ( ≦ 128 units)
○ By WY-300-IMS central network software, overall network status is under remote control
Mechanical Specifications: | WY-300 |
---|---|
Dimension (W × H × L): | 4 × 1 × 3 inch (10 × 2.5 × 7.5 cm) |
Housing Material: | Fire-proof anti-shock PVC |
• Electronics Assembly/ Medical Equipment/ Aerospace/ Military/ Semi-con/ Any ESD sensitive areas
• There are many workstations in high-tech electronics assembly lines that require strict ESD grounding.
The operators are required to use traditional single wire wrist-strap monitors when assembling highly
ESD sensitive products. The managers want to reinforce the real-time ESD monitoring through remote
networking. WY-300-M network is the best affordable solution to meet this challenging requirement.