Through reliable internal circuit design, the B530 high ohmic resistance tester is suitable for accurate resistance point to point and resistance to ground measurements for electrostatic protective materials in many industries. It can also be used to test AC/DC voltage and low resistance. Users can freely use. It is easy to use and equipped with many probes, plug and play. Configurated with rechargeable NiMH batteries, it is convenient to take to anywhere you do the test.
The following measurements and tests can be performed with the METRISO B530:
○ Resistance to ground, point-to-point and surface resistance, as well as volume resistance (with special measuring probes),LCD Digital Display;
○ complies with IEC 61340-4-1, IEC 61340-2-3, IEC 61340-4-5;
Test voltage / Test current | |
---|---|
Ohmic range | 1 mA ≤ I ≤ 1,3 mA |
High ohmic range | DC 10 volts,100 volts and 500 volts |
Test range | |
Low ohmic range | 1 Ohm to 9,99 KOhm |
High ohmic range | 1 kOhm to 199 Gohm |
Operating temperature | –10 ... +50 °C |
Relative humidity | Up to 75% |
The METRISO B530 measuring and test instrument allows quick and efficient testing of ESD protective measures in the EPA (electrostatic protected area).
The test instrument is suitable for:
• The selection of ESD materials
• Installation of selected protective measures
• Periodic inspection of protective measures