The Ohm-Stat ™ RT-1000 Resistance, resistivity ,temperature, humidity Test kit is easy to operate, compact, lightweight, portable meter designed to measure temperature, humidity and electrical resistivity/resistance. Using both internal and external test probes, the meter will measure resistivity, resistance to ground, resistance between two points according to EOS/ ESD association standards- S4.1, S6.1, S7.1, S11.11 and European standard CECC-EN 1000/15. With the accessory probes the meter can test the electrical circuitry of the building, ESD chairs, and smocks. Additional probes are available to measure heel straps, wrist straps, and small parts using miniature probes,and a concentric ring probe.
。Surface Resistivity: Parallel Probe Resistivity Method The parallel resistivity probe method, complies with ASTM D-257. It is used to give fast electrical resistivity measurements on flat homogeneous materials. It may be used on multiplayer materials, but this should be noted along with the temperature and humidity values on the data report. A. Place the meter on the desired surface to be tested. A. Move switch to the desired test voltage position, either 10 or 100 volts. B. Press and hold down the test power button until the resistance/resistivity and temperature and humidity values appears on the LCD screen. This will occur in about 15-20 seconds as specified inANSI/ESD standards.
○ Ranges:1×103~1×1012ohms
OHM-STAT RT-1000 | ||
---|---|---|
Brand | OHM-STAT | |
Model |
RT-1000
|
|
Function | Measuring resistance / resistivity, humidity and temperature | |
Resistivity Test Ranges | 103-106 Ω/106-1012Ω/m2 | |
Temperature Range | 32℉-100℉(0℃-37.8℃) | |
Humidity Range | 10%-90%RH | |
Accuracy |
士5% |
|
Display |
LCD |
|
Selector Switch |
10V/100V |
|
AC Power Adapter |
This plug allows the meter to be used with a center positive 9-12 volts 200 mA output power adapter. The input may be either 110 volts or 220 volts AC . |
|
Heavy hammer |
Two 5 pound concentric ring probes |
|
Size | 191*102*39mm | |
Fitting |
1 Ohm-Stat RT-1000Resistance-Resistivity- Humidity-Temperature Meter 1 Blow Molded, Foam Lined Travel Case 1 Concentric Ring Probe. (Optional) 2 5 lb. 2.5 inch Diameter Test probes. 1 Chair Probe 2 Smock Probes 2 Coil cords. 6 foot Test Grounding Leads. 1 Grounding Cord and Clip 1 9-volt battery 1 Ground Test Adapter 1 Product Instruction Bulletin 1 AC Power Adapter- positive center, 120- volt input, and 9-12 volt 200 mA output. |
|
Automatic power cut function, prolong battery life, automatically return to zero, ensure accuracy. Comply with NFPA, EOS / ESD, ANSI, UL, ASTM, military, environmental impact assessment and CECC standards. |
• It is applied to semiconductor factories and other environments requiring surface resistance testing.