GZ-1800 is a proactive ESD grounding monitor for operator / workstation with highest flexibility and performance specifications in the industry. This ultimate digital device provides complete protection to two operators by monitoring both resistance and voltage independently using dual wire wrist strap. GZ-1800 monitor meets ULV (ultra low voltage) requirement for safety and green energy for induced operator and work-station voltage. It also monitors ESD mat ground and low resistance of tool chassis ground simultaneously. Very easy to use with standard default settings. The user can also set the new alarm limits and OPC (operator presence check) via an optional dedicate PC software. Using an optional digital display module, the results measured can be viewed on-site and a set of external control interface are provided.
○ Measure Digital Values fdr Resistance irind
○ Monitor Operator Resistance ,Operator Body Voltage, Mat Resistance, Machine Resistance
○ Multiple Test Limited Selection Meetig S20.20 and IEC-61340
○ Factory default Body.Measurement Voltage±417mV,user selectable±25mV
○ Built-in Network connection
○ Built-in Operator-Presence-check with time control
○ Support External Interface
○ Built-in Measure-man for instant massive measure-n-recording
○ Patented Design
| GZ-1800 | |
|---|---|
| Wrist-strap alarm | High Limit: 8MΩ ~ 35MΩ; Low Limit: 750KΩ ~ 2.4MΩ |
| Operator voltage alarm | ±1V ~ ±5V |
| Mat(soft ground) alarm | 10MΩ ~ 1.5GΩ |
| Tool (hard ground) alarm |
2Ω ~ 20Ω |
| Software Support |
Support hardware (IR) Operator Presence Check ; Built-in network ports Support software Operator Presence Check with user-programmable time Via GZ-1800-D, provide digital display on LCD and external interfaces Power: 8 - 12V DC 100mA; Support multiple-unit power sharing |
| Mechanical | L: 4 inch W: 3 inch H: 1 inch |
• Hard drive manufacturing / GMR head testing / Electronics assembly / Aerospace / Military / Semiconductor Fabrication / Any static sensitive assembly and test environment
