SUTO's dew point sensor S 201 provides reliable and long-term stable dew point monitoring for industrial applications.This newly developed sensor provides better signal and stability for highly demanding industrial applications.The internal circuits of the sensors exclude drift caused by temperature changes, dust and aging, providing reliable measurements.The recalibration cycle can be extended to two years.S 201 is a complete dew point device integrated with sensors, displays, buttons and alarms.The operating buttons are located at the top of the display and can be operated by touching two keys with the fingers.Alarms and displays can be set by touching the buttons.Sensor parameters such as analog output ranges, alarm values, units, etc. can be easily set through the hill service suite.The suite can be used to connect sensors to a computer to change its Settings.
○ Suitable for low dew point of the dew point sensor, can be as low as 60 ° C
○ Long-term stability
○ Graphic Demonstration
○ Relay output
○ The IP65 shell provides good protection even in harsh industrial environments
○ Fast response provides safe and reliable indication when dew point is out of range
○ Can be directly installed in the dryer through G ½"thread
○ High precision of ± 2 ° C
| S 201 | |
|---|---|
| Measuring range（dew point） | -60℃~-20℃ |
| Measuring range（temperature） | -30℃~+70℃ |
| Dew point sensor |
TFPS |
| Temperature sensor | Pt100 |
| Pressure sensor | Not enable |
| Precision(dew point） | +2℃ |
| Precision（temperature） | ±0.3℃ |
| Pressure range | -0.1~5.0MPa |
| Operation temperature | -30℃~+70℃ |
| Tested gas | Noncorrosive gas |
| Environment humidity | <90%,non-condensing |
| EMC | IEC/EN 61326-1 |
| Response time t90 | -60℃->-20℃：20s，0℃->-60℃：180s |
| Enviroment temperature | -20℃~50℃ |
| Power voltage | 12~30VDC |
| Current consumption | 80mA 24VDC |
| Output singnal | 4~20mA 3vlines |
| Current consumption | 2×M12，5 cores |
| Process connection | G1/2"thread（ISO 228/1）Stainless steel 1.4301（SUS 304） |
| Shell material | PC+ABS |
| Protection grade | IP65 |
| Sensor protection |
sintered filter |
| Transport temperature |
-30℃~+70℃ |
| Storage temperature | -20℃~+50℃ |
| Weight | 226g |
