The Solair1100LD air particle counter provides laser design in the portable series. With a 0.1 micron induction and 1 cubic feet / minute (28.3 liter / minute) flow velocity, a perfect clean room standard reporting function, a built-in battery and a long life and high efficiency laser diode technology, the technology provides higher energy, high purity photochemical action, better noise band signals. Compared with conventional helium neon particle counter, it does not need frequent cleaning, regular replacement of laser tube and low concentration limit. Wide color screen 5.7 inch (14.47CM) touch screen, simple operation, with 8 particle channels, can connect 4 environmental sensors, and can store large amounts of data. Solair 1100LD multi-function demonstration, can be used for portable instruments or large equipment detection system,and conforms to the JIS standard.
。0.1- 1.0 μm sensitivity
。1.0 CFM (28.3 LPM)
。Up to 8 channels of simultaneous count data
。21 CFR Part 11 compliant secure USB flash transfer
。Laser Diode Sensor Technology
。5.7 inch color touch screen display
。Thermal printer
。Stainless steel construction
。Ethernet/RS485/Modbus, 4x 4-20mA analog outputs
。3,000 record data storage
。Report wizard: ISO-14644-1, EU GMP Annex 1, FS-209E
。2 year warranty
。Portable and lightweight
。touch screen display,Simple and easy to operate
。Laser Diode Sensor Technology
。Faster Sampling
。Internal HEPA to avoid pollution
。Auto Flow Rate Compensation ensures accurate measurement
。Gases Sampled
Solair 1100LD | ||
---|---|---|
Size Range | 0.10 - 1.0μm | |
Standard 8 channels |
0.10, 0.15, 0.2, 0.25, 0.3, 0.5, 0.7, 1.0μm |
|
Counting Efficiency |
50% @ 0.1 μm; 100% for particles > 0.15 μm (per ISO 21501-4) |
|
Concentration Limits |
1,000,000 particles /ft3 (34,300,000/m3) @ 10% coinsidence loss
|
|
Flow rate | 1.0 CFM (28.3 LPM) | |
Laser Source | Laser Diode | |
Zero Count Level | < 1 count / 5 minutes (per ISO 21501-4) | |
Calibration | Meets ISO 21501-4 calibration using NIST traceable PSL spheres, DMA and condensation particle counter | |
Count Modes | Automatic, manual, beep, concentration, cumulative/differential, realtime with LMS software | |
Data Storage | 3,000 sample records, rotating buffer, particle and environmental data, location and time | |
Communication Modes | USB, Ethernet, RS-485, USB flash drive | |
Supporting Software |
LMS Express, LMS Express RT, LMS Pharma, LMS Pro |
|
Touch Screen Display | 5.7 inch (14.47 cm), color TFT touch screen display | |
Printer | Available with or without a built-in thermal printer | |
Reports |
FS-209, ISO 14644-1:2015, ISO 14644-1:1999, EU GMP Annex 1 |
|
Alarms | Integrated adjustable alarm and external alarm connector; alarms on counts, low battery and sensor failure | |
Enclosure | Stainless steel | |
Sample Output | Internally filtered to 100% @ 0.1 µm, optional HEPA filtration for cooling system exhaust | |
Vacuum Source | Internal pump, automatic flow control | |
Power | 100-240 VAC, 50-60 Hz, external AC/DC adapter | |
Dimensions | 14.65“ (l) x 8.0” (w) x 10.4” (h), [37 x 20 x 26 cm] | |
Weight | With battery: 23.35 lbs (10.6 kg), without battery 20.25 lbs (9.19 kg) | |
Enviornmental Conditions |
50°F
to 104°F (10°C to 40°C) / 20% to 95% non-condensing |
• wafer fab , FPD display manufacturing
• gas monitoring
• R&D institute